CAREERS

Jobs in Vadodara

Join Us

Unlock Your Potential with Classic Buttons

At Classic Buttons Private Limited, we are always looking for hardworking, dedicated and sincere candidates. We provide ample opportunities to people from across the country. Our team of highly qualified professionals strives to deliver the best quality output within the deadlines. Join our team to excel in your career.

CURRENT OPENINGS

Job Location: Manjusar, Vadodara, Gujarat

Job Description

  • Installing, maintaining, and repairing electrical control, wiring, and lighting systems.
  • Performing general electrical maintenance.
  • Inspecting electrical components.
  • Disassembles, inspects, reassembles, troubleshoots, repairs, and replaces malfunctioning parts or equipment (motors, switches, sensors, input/ output boards, controllers servos, gears, sprockets chains, knives, etc. using test equipment
  • Troubleshooting electrical issues using appropriate testing devices.
  • Repairing and replacing equipment, electrical wiring, and fixtures.
  • Following National Electrical Code state and local building regulations.

Package offered: Rs. 1.64 LPA

Job Description

  • Ensure that the machines are operating at optimum production.
  • Ensure the following and coordinate with the fitter whenever required:
    • There is no chipping
    • There is no taper turning
    • The needles are making proper holes
    • The buttons are of the same thickness
    • The shape is coming as desired
  • Ensure that there is a minimum stop time
  • Take corrective action if the machine is stopped by coordinating with the fitter
  • Ensure that the buttons are not being processed on the back side
  • Ensure that the photocell is working fine and remove the powder as and when accumulated
  • Refill blanks when empty
  • Quality first
  • The machine should not run empty for any reason

Job Description

  • Perfect shape
  • 1-4 complete, check for thickness
  • Feeding
  • Photocell
  • Dropping/ Suction
  • Tool holder complete with stopper in the right place
  • No blank/button flying
  • Clipping
  • Hole distance
  • Special instruction for tool design
  • Measure Speed
  • Set Proximity
  • Set Thickness gauge
  • Put Proper Slip

Job Description

  • Maintain minimum wastage
    • Any wastage in any form needs to be collected on a regular basis if the same happens on the machine, thereby coming to know which machine gives us more problem and one can solve it.
  • Informing the casting head if any blanks are getting over of the same order.
  • Planning machining prog based on urgency.
    • As per the blanking report
    • Preparing for the next setting
  • Preventive Maintenance– To see if any particular machine requires maintenance.
    • Based on sound, the persistently same problem faced by the same machine
    • Maintaining a report of consumables going into the individual machine in the department along with quantity and date.
  • Maintain Minimum wastage
    • If wastage is above a particular limit inform the office, so if additional casting needs to be given it can be (based on the order)
  • QC of buttons- whether it is made properly with respect to quality.
    • By inspection of design and thickness
  • To maintain production reports of individual buttons/ blanks, which will be forwarded to the following dept.

Job Description

  • Maintaining stock of Raw-Material and reporting about the low stock. Different RM have different reporting times- Calculating each and every raw material requirement
    • Filling out report weekly based on the stock available
  • Testing of RM as when a batch comes and noting down in the tests in a book
    • Eg. Resin- Gel time, viscosity, Colour, Gravity
  • Informing in office if any variation in RM quality apart from acceptable quality by providing the report
  • Maintaining Minimum wastage
    • Being on the floor and explaining to the workers how work needs to be carried out
      • Raw-Material Wastage- Minimum quantity falls on the floor, cleaning the RM leftovers from the packaging drum/ vessel
      • Sheet breakage wastage- Removing the sheet not too soft, and cleaning the sheet drum properly so that there are no foreign particles in the drum
      • Punching wastage- Proper alignment of the punching belt and aligner with respect to the sheet
  • Planning casting prog based on urgency as well as reducing worker load
    • Calculate colour
    • Checking colour shade
    • Writing down the casting weights, size, colour thickness and article number and giving them to the weigher of RM.
    • If any program is marked urgent, it needs to be casted first.
    • Multi-layer casting reduces the blanks output, so if there is a shortage of blanks in the machining dept. (The mcing dept. head will inform) producing such blanks by which the machines running do not have a stop time.
  • To maintain a report of production
    • To maintain production reports of individual blanks, which will be forwarded to the following dept.
      • If wastage is high, do additional casting for the same
  • QC of blanks– whether it is made properly with respect to quality and quantity.
    • Above report for quantity
    • Quality– random check of sheets from all drums for thickness and disbursement of pigments and pearl.
  • If any maintenance is required, get it done
    • Inform maintenance personnel for the same
    • Maintaining reports of consumables going into individual machines in the department along with quantity and date
  • To instruct M/cing dept. If any particular instruction is given.
    • To write in the blanking report
  • Handling workers in dept and if problem report to the office
    • If any problems are faced by the workers related to work or amongst themselves, one needs to report to the office.

Job Description

  • Check sheet/ gross
  • Thickness
  • Proper marking on slips
  • Production rounds
  • Wastage
  • Mark slips
  • Dryer Rounds
  • Dryer Wastage
  • Proper slips
  • To maintain production reports of individual blanks, which will be forwarded to the following dept.
  • Distributing the same on machines or stocking the same

Job Description

  • Perfect weighting
  • Perfect MEKP & Mixing
  • Proper Pouring
  • Properly emptying the container
  • Filtration
  • Clean vessels
  • Sheet cutting straight
  • No sheet breakage in removing or putting on the floor
  • Perfect punching
  • CenteringDistance
  • Jali should not break
  • No taper blanks
  • Proper chalni

Job Description

  • Making report of machining dept.- wt. of buttons made in the shift/ speed of machines
  • To check whether the Machining of buttons is proper
  • Mixing of buttons based on the quality of machining for polishing
  • Deciding the weight of quartz power to put in drums
    • If buttons are rough lesser quantity needs to be loaded, and more quartz powder d=needs to be added in the drum for polishing
  • Checking the right weight of ceramic media in drums and getting it topped up on a regular basis
  • Getting maintenance done
  • Getting the buttons removed from drums with a proper polish
  • To maintain the production report of individual button/ buttons, which will be forwarded to the following dept.

Job Description

  • Maintaining store inventory of consumables
  • Maintaining report of stock used in individual machinery
    • Thereby knowing which machine is using more consumables from which we come to know whether a particular machine requires maintenance or not
  • Informing the Maintenance dept of the breakdown of machinery if the same parts are being used again and again thereby reducing further breakdown as well as usage of consumables
  • Informing purchase dept/ office about consumables required.

Job Description

  • Proper counting and weighing of the sample packet
  • Making sure to pack in the right packet
  • Counting the right no. of packets in the bag
  • Writing down the right item in the bag
  • To maintain the production report of individual button/ buttons, which will be forwarded to the office

Job Description

  • Production
  • Production planning based on orders/stock required
  • Tabulating production reports
  • Production planning for Casting dept./ machining dept. based on goods required and urgency of the order
  • Despatch
  • Dispatching of goods based on order
  • Accounts

Job Description

  • Must reach 10 minutes before duty time so that they can change, go to the bathroom, drink water etc. Must be at a duty station at duty hour. Same applies at lunchtime (30 mins. From leaving the machine to join the machine)
  • Cannot leave machine during Evening/ Lunchtime until reliever comes to the machine
  • To wear Earplugs/ Masks Compulsorily
  • No throwing wrappers etc, no spitting on the floor, To use dustbins.
  • Bathroom/ Water etc only once every two hours
  • Must be at work station and not found huddled together or at the window/ in another department or elsewhere.
  • Proper marking of slips

Job Description

  • Ensure dryers are emptied fully every time.
  • Drying blanks and buttons and getting them distributed based on the requirement
  • For inspection weighing each button item along with making gross to make sure the right quantity has been sent and received after packing
  • No mixing of buttons and blanks/ two different types of buttons